LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Corvette Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Cushion Inner Trim Panel Replacement (with HP2)

Front Seat Cushion Inner Trim Panel Replacement (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Cushion Inner Trim Panel (With HP2)
GM1960360Courtesy of GENERAL MOTORS CORP.
Front Seat Cushion Inner Trim Panel Replacement (with HP2)

Callout Component Name

Preliminary Procedure

  1. Remove the front seat back cushion lower finish panel by pulling the panel rearward to disengage the retainers.
  2. Remove the front seat belt buckle. Refer to Front Seat Belt Buckle Replacement (without HP2) , Front Seat Belt Buckle Replacement (with HP2) .
1 Front Seat Cushion Inner Trim Panel Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Front Seat Cushion Inner Trim Panel