Instrument Panel Accessory Trim Plate Replacement (without RPO SLT)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Accessory Trim Plate (Without RPO SLT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel cluster trim plate cover. Refer to Instrument Panel Cluster Trim Plate Cover Replacement (With RPO SLT) or Instrument Panel Cluster Trim Plate Cover Replacement (Without RPO SLT) .
1	Instrument Panel Accessory Trim Plate Assembly Procedure Disconnect the electrical connectors. When replacing the accessory trim plate, transfer all necessary components.
2	Retainer Clips (Qty: 14)

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel cluster trim plate cover. Refer to Instrument Panel Cluster Trim Plate Cover Replacement (With RPO SLT) or Instrument Panel Cluster Trim Plate Cover Replacement (Without RPO SLT) .

Instrument Panel Accessory Trim Plate Assembly

Procedure

Disconnect the electrical connectors.
When replacing the accessory trim plate, transfer all necessary components.

Retainer Clips (Qty: 14)