Front Bumper Fascia Replacement (ZL1)
Front Bumper Fascia Replacement (ZL1)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front wheelhouse liners. Refer to Front Wheelhouse Liner Replacement (Base, RS, SS) , Front Wheelhouse Liner Replacement (ZL1) . |
|
| 1 | Front Bumper Fascia Upper Support Push-In Retainer (Qty: 6) |
| 2 | Front Fender Support Bracket Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 7 N.m (62 lb in) |
| 3 | Front Bumper Fascia Outer Bracket Nut (Qty: 6) Tighten 7 N.m (62 lb in) |
| 4 | Front Bumper Fascia Bolt (Qty: 2) Tighten 3 N.m (27 lb in) |
| 5 | Front Bumper Fascia Lower Bolt (Qty: 2) Tighten 7 N.m (62 lb in) |
| 6 | Front Bumper Fascia Lower Screw (Qty: 5) Tighten 7 N.m (62 lb in) |
| 7 | Front Bumper Fascia Lower Retainer (Qty: 6) |
| 8 | Front Bumper Fascia Procedure
|