Rear Seat Back Cover Replacement

Fig 1: Rear Seat Back Cushion Cover

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear seat back cushion latch cover. Refer to Rear Seat Back Cushion Latch Cover Replacement . Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Replacement (Coupe) , Rear Seat Back Cushion Replacement (Convertible) .
1	Rear Seat Back Cushion Cover Procedure Push rearward on both lower cross bar hinge locks to release the seat back frame. Disengage the J-channel retainers from the seat back cushion frame. Remove the hog rings from the under side of the rear seat back cushion cover. Pull the cover away from the pad to disengage the hook and loop retainers. TIP: When installing the rear seat back cover, pull the cover tightly in all corners to ensure that no creasing occurs.

Callout

Component Name

Preliminary Procedures

Rear Seat Back Cushion Cover

Procedure

Push rearward on both lower cross bar hinge locks to release the seat back frame.
Disengage the J-channel retainers from the seat back cushion frame.
Remove the hog rings from the under side of the rear seat back cushion cover.
Pull the cover away from the pad to disengage the hook and loop retainers.

TIP: When installing the rear seat back cover, pull the cover tightly in all corners to ensure that no creasing occurs.