LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze LT >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement

Front Fender Replacement

Fig 1: Front Fender Mounting Hardware
GM2028352Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
  2. Remove front bumper fascia guide. Refer to Front Bumper Fascia Replacement
  3. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement
  4. Remove the headlamp. Refer to Headlamp Replacement
  5. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement
  6. Remove the front fender shipping cover. Refer to Front Fender Shipping Cover Replacement 
  7. Remove the front fender insulator. Refer to Front Fender Insulator Replacement 
1 Front Fender Bolt (Qty: 7)
CAUTION: Refer to Fastener Caution

Tighten:  8 N.m (70 lb in)
2 Front Fender Bolt

Tighten:  8 N.m (70 lb in)
3 Front Fender Bolt
Tip:  Simply loosen the bolt rather than remove.

Tighten:  8 N.m(70 lb in)
4 Front Fender
scientia non olet · About LEMON Manuals