LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Traverse LT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Luggage Rack And Roof Trim) >> Repair Instructions >> Luggage Carrier Nut Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.
    2. Fig 1: Luggage Carrier Rivnut
    GM343998Courtesy of GENERAL MOTORS COMPANY
  2. Install a replacement rivnut to the hole in roof using a rivnut tool, or equivalent.
  3. Install the luggage carrier. Refer to Luggage Carrier Replacement (Traverse) Luggage Carrier Replacement (Acadia) .
scientia non olet · About LEMON Manuals