Front Fender Replacement (Traverse)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Fender (Traverse)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Traverse) . Remove the headlamp. Refer to Headlamp Replacement (Traverse) . Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement (Traverse) .
1	Front Fender Bolt (Qty: 7) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Front Fender Procedure Transfer parts as needed.

Callout

Component Name

Preliminary Procedures

Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Traverse) .
Remove the headlamp. Refer to Headlamp Replacement (Traverse) .
Remove the rocker panel molding. Refer to Rocker Panel Front Molding Replacement (Traverse) .

Front Fender Bolt (Qty: 7)

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Front Fender
Procedure
Transfer parts as needed.