Front Bumper Fascia Replacement (Traverse)

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Bumper Fascia (Traverse)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement (Acadia, Enclave, Traverse) . Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement (Traverse) .
1	Front Bumper Fascia Lower Bolt (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Front Bumper Fascia Bolt (Qty: 2)
3	Front Bumper Fascia Upper Screw (Qty: 7)
4	Front Bumper Fascia Upper Bolt (Qty: 2)
5	Front Fascia Procedure Carefully push a small nylon wedge between the fascia and the front fascia guide. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the front fascia guide. Disconnect any electrical connectors. Transfer components as necessary.