Removal Procedure
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement .
- Remove the high pressure pump shield. Refer to Fuel Pipe Shield Replacement .
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief Fuel Pressure Relief (High Side) .
- Loosen the fuel rail crossover pipe (1) fitting to the right fuel rail (2).
- Loosen the fuel rail crossover pipe (1) fitting to the left fuel rail (3).
- Remove the fuel rail crossover pipe (1) from the vehicle. Discard the pipe.