Rear Seat Beam Replacement
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Take care not to scratch the body
- Remove these items:
- Rear door sill trim (see REAR DOOR SILL AREA ).
- Rear seat-back (see SEAT-BACK ).
- Rear seat cushion (see REAR SEAT REMOVAL/INSTALLATION ).
- Rear center seat belt buckle (see REAR SEAT BELT BUCKLES ).
- Cargo area side trim panel (see TRIM REMOVAL/INSTALLATION - CARGO AREAS ).
- Remove the bolts, then remove the rear seat-back beam (A).
- Install the beam in the reverse order of removal.