LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Oil Cooler Replacement

Engine Oil Cooler Replacement

Fig 1: Engine Oil Cooler
GM2153756Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove engine oil cooler coolant inlet hose. Refer to Engine Oil Cooler Coolant Inlet Hose Replacement (LS3) .
  2. Remove engine oil cooler pipe. Refer to Engine Oil Cooler Pipe Replacement (LS3) .
1 Engine Oil Cooler Fastener (Qty: 2)
CAUTION: Refer to Component Fastener Tightening Caution .

Tighten:  10 N.m (89 lb in)
2 Engine Oil Cooler Fastener (Qty: 5)

Tighten:  25 N.m (18 lb ft)
3 Engine Oil Cooler

Procedure

  1. Transfer components as necessary.
  2. Ensure the full oil level after installation.
scientia non olet · About LEMON Manuals