LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Oil Cooler Pipe Replacement (LS3)

Engine Oil Cooler Pipe Replacement (LS3)

Fig 1: Engine Oil Cooler Pipe (LS3)
GM2208358Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Install oil drain pan under the vehicle.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
1 Radiator Inlet Hose Clamp
Procedure: 
Using J 38185:  Hose Clamp Pliers reposition the radiator inlet hose clamps.
Special Tools: 
J 38185:  Hose Clamp Pliers
2 Engine Oil Cooler Pipe Bolt
CAUTION: Refer to Fastener Caution .

Tighten:  10 N.m (89 lb in)
3 Engine Oil Cooler Pipe
Procedure: 
Disconnect the engine oil cooler pipe from the engine oil cooler. Refer to Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 
scientia non olet · About LEMON Manuals