Engine Oil Cooler Coolant Inlet Hose Replacement (LS3)

Fig 1: Engine Oil Cooler Coolant Inlet Hose (LS3)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Install oil drain pan under the vehicle. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
1	Engine Oil Cooler Coolant Inlet Hose Procedure: Disconnect the engine oil cooler coolant inlet hose from the engine and cooler. Refer to Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection

Callout

Component Name

Preliminary Procedures

Engine Oil Cooler Coolant Inlet Hose
Procedure:
Disconnect the engine oil cooler coolant inlet hose from the engine and cooler. Refer to Engine Oil Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection