LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Shroud Replacement (LLT)

Engine Coolant Fan Shroud Replacement (LLT)

Fig 1: Engine Coolant Fan Shroud (LLT)
GM2207917Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove air cleaner resonator and outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Reposition radiator overflow hose. Refer to Radiator Overflow Hose Replacement (LLT) .
  3. Remove engine coolant air bleed hose. Refer to Engine Coolant Air Bleed Hose Replacement (LLT) .
  4. Remove radiator inlet hose. Refer to Radiator Inlet Hose Replacement (LLT) .
  5. Reposition transmission cooler lines.
  6. Disconnect the engine coolant fan motor connector.
1 Engine Coolant Fan Shroud Bolt (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:  8 N.m (6 lb in)

2 Engine Coolant Fan Shroud