Radio Speaker Amplifier Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radio Speaker Amplifier Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Floor Console Screw (Qty: 8) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Front Floor Console Assembly Refer to Front Floor Console Replacement (Except Cadillac) or Front Floor Console Replacement (Cadillac) .
3	Front Floor Console Bracket Screw (Qty: 4) Tighten: 9 N.m (80 lb in)
4	Front Floor Console Bracket
5	Amplifier Screw (Qty: 3) Tighten: 9 N.m (80 lb in)
6	Radio Speaker Amplifier Assembly Tip: Disconnect the electrical connectors. If installing a replacement amplifier, program the amplifier. Refer to Control Module References .