LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1179 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Replacement (Except Cadillac)

Front Floor Console Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Floor Console Assembly
GM1693900Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the 2 front seats. Refer to Front Seat Replacement - Bucket (without HP2) or Front Seat Replacement - Bucket (with HP2) .
  2. Remove the right and left front floor console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (Except Cadillac)  and Front Floor Console Side Trim Panel Replacement - Left Side (Except Cadillac) .
  3. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Except Cadillac) .
  4. Disconnect the electrical connectors to the console assembly.
1 Front Floor Console Assembly
Tip: 
  1. With the aid of an assistant, remove the console from the vehicle.
  2. When replacing the console assembly, transfer all the necessary components.