Instrument Cluster Replacement (Impala)

Fig 1: Replacing Instrument Panel Cluster (IPC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the instrument panel trim plate. Refer to Instrument Panel Trim Plate Replacement (Impala) or Instrument Panel Trim Plate Replacement (Monte Carlo) .
1	Screw, Instrument Panel Cluster (Qty 4) Tighten: 2 N.m (18 lb in)
2	Cluster Assembly, Instrument Panel Refer to Control Module References for programming and setup information. Tip: Disconnect the electrical connector.