Instrument Panel Trim Plate Replacement (Monte Carlo)

Fig 1: Identifying Instrument Panel (I/P) Upper Trim Pad Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the instrument panel cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement . Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side .
1	Instrument Panel Trim Plate Screws (Qty: 4) Tighten: 2 N.m (18 lb in)
2	Instrument Panel Trim Plate
3	Retainer Clips (Qty: 3)