Instrument Panel Trim Plate Replacement (Impala)

Fig 1: Identifying Instrument Panel (I/P) Trim Plate Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the instrument panel outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side and Instrument Panel Outer Trim Cover Replacement - Right Side .
1	Screw, Instrument Panel Trim Plate (Qty: 4) Tighten: 2 N.m (18 lb in)
2	Plate Assembly, Instrument Panel Trim Tip: Disconnect the electrical connector. Tilt the steering column to the lowest position. Remove the driver information center switch. Refer to Driver Information Display Switch Replacement (Impala) or Driver Information Display Switch Replacement (Monte Carlo) .
3	Clip, Retainer (Qty: 8)