Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the charge air cooler outlet pipe. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) or Charged Air Cooler Hoses/Pipes Replacement (Outlet) .
- Remove the nut and the positive cable from the intake air heater (IAH).
- Disconnect the air intake heater electrical connector.
- Remove the 4 intake air heater bolts and remove the IAH and pipe and discard the IAH gasket.