Instrument Panel Cluster (IPC) Replacement (Impala)
Instrument Panel Cluster (IPC) Replacement (Impala)
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the Instrument Panel Trim Plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) (Impala) or Trim Plate Replacement - Instrument Panel (I/P) (Monte Carlo) . |
|
| 1 | Screw, Instrument Panel Cluster (Qty 4) Tighten: 2 N.m (18 lb in) |
| 2 | Cluster Assembly, Instrument Panel Tip: Disconnect the electrical connector. |