Sunroof Motor/Actuator Replacement

Preliminary Procedures

1. Remove the carpet retainer. Refer to Carpet Retainer Replacement - Front (Impala) or Carpet Retainer Replacement - Front (Monte Carlo) .
2. Remove the sunshade. Refer to Sunshade Replacement .
3. Remove the pillar garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar (Impala) or Garnish Molding Replacement - Windshield Pillar (Monte Carlo) .
4. Remove the upper center pillar. Refer to Trim Panel Replacement - Upper Center Pillar .
5. Remove the rear upper quarter trim. Trim Panel Replacement - Rear Quarter Upper (Impala) or Trim Panel Replacement - Rear Quarter Upper (Monte Carlo) .
6. Remove the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf .
7. Remove the headliner. Refer to Headliner Replacement (Impala) or Headliner Replacement (Monte Carlo) .
8. Remove the sunroof motor/actuator. Refer to Sunroof Motor/Actuator Replacement .

Tighten:  10N.m (89 lb in)