Headliner Replacement (Monte Carlo)

Fig 1: Replacing Headliner

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the windshield garnish trim moldings. Refer to Garnish Molding Replacement - Windshield Pillar (Impala) or Garnish Molding Replacement - Windshield Pillar (Monte Carlo) . Remove the sunshades and the sunshade retaining clips. Refer to Sunshade Replacement . Remove the upper quarter trim panels. Refer to Trim Panel Replacement - Rear Quarter Upper (Impala) or Trim Panel Replacement - Rear Quarter Upper (Monte Carlo) . Remove the coat hooks. Refer to Coat Hook Replacement (Monte Carlo) . Remove the weather strips around the top of each door opening. Remove the front passenger seat. Refer to Seat Replacement - Front Bucket (Impala) or Seat Replacement - Front Bucket (Monte Carlo) .
1	Trim Panel Screw Tighten: 2 N.m (18 lb in)
2	Headliner Trim Panel Retainer (Qty: 2)
3	Assist Handle Retainer (Qty: 2)
4	Headliner Trim Panel Assembly Tip: Place the front seats fully forward with the seat back fully reclined. Disconnect the electrical connectors. With the aid of an assistant, remove the headliner out of the side door.