Upper Center Pillar Trim Panel Replacement

Fig 1: Replacing Upper Center Pillar Trim Panel

Courtesy of GENERAL MOTORS CORP.

Trim Panel Replacement - Upper Center Pillar

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the lower center pillar trim. Refer to Trim Panel Replacement - Lower Center Pillar .
1	Center Pillar Upper Trim Screw Cover
2	Center Pillar Upper Trim Screw Tighten: 2 N.m (18 lb in)
3	Center Pillar Upper trim Tip: Remove the seat belt D-ring from the adjuster assembly. Tighten: 35 N.m (25 lb ft) Pull the trim panel toward the inside of the vehicle to disengage the retainers.
4	Center Pillar Upper Trim Clip