LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1949 (Engine Cooling System) >> Repair Instructions >> Coolant Recovery Reservoir Replacement (HP5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill With HP5)  or Cooling System Draining and Filling (GE 47716 Fill With HP5) 
  2. Remove the underhood junction block. Refer to Underhood Electrical Center or Junction Block Replacement (HP5)
  3. Remove the radiator vent inlet hose. Refer to Radiator Vent Inlet Hose Replacement (HP5) 
    4. Fig 1: Coolant Recovery Reservoir Bolt
    GM2158169Courtesy of GENERAL MOTORS CORP.
  4. Remove the coolant recovery reservoir bolt (1).
    5. Fig 2: Coolant Recovery Reservoir Bolt & Nut
    GM2158166Courtesy of GENERAL MOTORS CORP.
  5. Remove the coolant recovery reservoir bolt (1).
  6. Remove the coolant recovery reservoir nut (2).
  7. Unclip the coolant recovery reservoir hose from the fan shroud.
  8. Remove the coolant recovery reservoir (3) from the vehicle.
scientia non olet · About LEMON Manuals