Manual Shift Shaft Seal and Bearing Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required:

J 45161 Manual Shift Shaft Bearing Replacer. See Special Tools .

Fig 1: View Of Manual Shift Shaft Seal Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the manual shift shaft seal assembly (713) from the transmission case assembly using a small pry bar.

Fig 2: Removing Manual Shift Shaft Bearing

Courtesy of GENERAL MOTORS CORP.

Using J 45161 and a hammer, drive the manual shift shaft bearing (714) through the transmission case assembly bore to remove the bearing. See Special Tools .