LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Automatic Transaxle - AF33-5 (Removal & Installation, Service & Overhaul)) >> Repair Instructions >> Low and Reverse Clutch Piston Travel Measurement

Low and Reverse Clutch Piston Travel Measurement

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

    Fig 1: Measuring Low & Reverse Clutch Piston Stroke
    GM749796Courtesy of GENERAL MOTORS CORP.
  1. Using J 45166  (1) and J 45200  (2) set the Dial Indicator. See Special Tools .
  2. CAUTION: When you use compressed air in order to clear fluid passages and to dry parts, always aim the air pressure away from face and eyes. Always wear adequate eye protection in order to avoid injury from dirt and debris that may adhere to parts.
  3. Apply compressed air to the case oil port, (see insert) in order to measure the low and reverse clutch piston stroke. Refer to Low and Reverse Clutch in Transmission Clearance Specifications  for correct piston travel.