Fluid Pump Assembly Removal

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required:

J 45053 Universal Clamp Press. See Special Tools .

Fig 1: Locating Fluid Pump Bolts

Courtesy of GENERAL MOTORS CORP.

Rotate the transmission assembly so the fluid pump is facing up.
Remove the 8 fluid pump bolts.

Fig 2: Removing Fluid Pump Assembly

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Do not damage the stator shaft bushing.

Using J 45053 , remove the fluid pump assembly from the transmission case. See Special Tools .