Installation Procedure
- Apply a bead of sealer to the plenum front panel.
Plenum Front Panel (1) - Install
- CAUTION:
Refer to Fastener Caution .
Plenum Front Panel Bolt (1) - Install and tighten [ 3x ] 9 N.m (80 lb in)
- Plenum Front Panel Nut (2) - Install and tighten [ 3x ] 9 N.m (80 lb in)
- Install the windshield wiper motor harness (3) to the plenum front panel.
Plenum Front Panel Bolt (1) - Install and tighten [ 4x ] 9 N.m (80 lb in)
- Plenum Front Panel Nut (2) - Install and tighten [ 3x ] 9 N.m (80 lb in)
- Install the ambient air quality sensor harness (3) to the plenum front panel.
- Windshield Wiper Transmission (2) - Install - Windshield Wiper Transmission Replacement
- Air Inlet Deflector Water Deflector - Install - Air Inlet Deflector Water Deflector Replacement
- Air Inlet Grille Panel - Install - Air Inlet Grille Panel Replacement
Install the left and right side front compartment side sight shield (2). Front Compartment Side Sight Shield Replacement