LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Installation Procedure

Installation Procedure

  1. GM5471872Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  2. Instrument Cluster (2) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications 
  4. GM5637177Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Cluster Trim Plate (2) - Install

  5. Instrument Panel Cluster Trim Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
  6. GM5730572Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Instrument panel steering column upper trim cover is removed for graphic clarity.

    {If equipped} Connect the electrical connector (1)

  7. GM5422815Courtesy of GENERAL MOTORS COMPANY

    Secure the instrument panel steering column upper trim cover (1) to the instrument panel steering column lower trim cover.

  8. GM5422006Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Instrument Cluster Hood (1) - Install

  9. GM5421700Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  10. Instrument Panel Extension (1) - Install
  11. GM5423347Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  12. Windshield Garnish Molding Bolt (2) - Install and tighten [2x] - Fastener Specifications
  13. Align the retainer clips with the slots in the A pillar and press the windshield garnish moldings (1) into place.
  14. Windshield Garnish Molding (1) - Install [2x]
  15. GM5446428Courtesy of GENERAL MOTORS COMPANY

    Connect and position the wiring harness.

  16. Instrument Panel Knee Bolster (1) - Install
  17. GM5446424Courtesy of GENERAL MOTORS COMPANY

    Data Link Connector Bolt (1) - Install and tighten [2x] - Fastener Specifications

  18. Instrument Panel Knee Bolster Bolt (2) - Install and tighten [3x] - Fastener Specifications
  19. GM5433957Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Center Trim Pad (1) - Install

  20. Return the steering column to its original position.
  21. GM5310879Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  22. Instrument Panel Lower Trim Panel Insulator (1) - Install
  23. GM5310878Courtesy of GENERAL MOTORS COMPANY

    Install the tabs into the instrument panel lower trim panel insulator (1).

  24. GM5310877Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator Retainer (1) - Install

  25. Instrument Panel Insulator Bolt (2) - Install and tighten [2x] - Fastener Specifications
  26. Instrument Panel Insulator Nut (3) - Install and tighten [2x] - Fastener Specifications
  27. GM5300282Courtesy of GENERAL MOTORS COMPANY

    Attach the hood primary latch release cable end retainer to the hood primary latch release cable handle (1).

  28. GM5421735Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Outer Trim Cover - Left Side (1) - Install

  29. GM5443235Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  30. Instrument Panel Lower Airbag - Driver Side (2) - Install
  31. Instrument Panel Lower Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
  32. Enable the SIR System. SIR Disabling and Enabling .
  33. Perform the necessary programming and setup procedure: Control Module References
scientia non olet · About LEMON Manuals