Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Brake Caliper (1) - Install
- CAUTION:
Front Brake Caliper Guide Pin Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Remove the plug from the brake hose outlet.
- Remove the plug the front brake caliper inlet.
Front Brake Hose (2) - Install
- Front Brake Hose Washer (3) - Install NEW [2x]
- Front Brake Hose Fitting (1) - Install and tighten - Fastener Specifications
{If equipped} Front Disc Brake Pad Wear Sensor (2) @ Front Brake Caliper - Install
- Front Brake Caliper Bleeder Valve Cap (1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Bleed the brake system. Hydraulic Brake System Bleeding (JE5, J6G) , or Hydraulic Brake System Bleeding (J55)
- Check for brake system leaks.
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.