Removal Procedure
WARNING:
- Air Inlet Grille Panel - Remove - Air Inlet Grille Panel Replacement
Brake Pressure Modulator Valve Secondary Brake Pipe Fitting (1) - Disconnect
- Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
Brake Pressure Modulator Valve Primary Brake Pipe Fitting (1) - Disconnect
- Plug the master cylinder outlet port to prevent brake fluid loss and contamination.
- Engine Wiring Harness Fuse Block Bracket - Remove - Engine Wiring Harness Fuse Block Bracket Replacement (LGX)Engine Wiring Harness Fuse Block Bracket Replacement (LTA-Driver Side)Engine Wiring Harness Fuse Block Bracket Replacement (LTA-Passenger Side)
- Without separating the engine from the transmission, lower the powertrain. - Engine Replacement
Brake Pressure Modulator Valve Pipe Pass Through Grommet (1) - Release
Retainer (1) - Release
Brake Pressure Modulator Valve Primary Brake Pipe Fitting (1) @ Brake Pressure Modulator Valve - Disconnect
- Plug the brake pressure modulator valve inlet port to prevent brake fluid loss and contamination.
Brake Pressure Modulator Valve Secondary Brake Pipe Fitting (1) @ Brake Pressure Modulator Valve - Disconnect
- Plug the brake pressure modulator valve inlet port to prevent brake fluid loss and contamination.
- Brake Pressure Modulator Valve Pipe - Remove