Removal Procedure
- Front Floor Console (1) - Remove - Front Floor Console Replacement
- Windshield Garnish Molding (1) - Remove - Windshield Garnish Molding Replacement
[2x]
- Steering Column (2) - Remove - Steering Column Replacement (N37)Steering Column Replacement (N38)
- Instrument Panel Accessory Bracket (2) - Remove - Instrument Panel Accessory Bracket Replacement NOTE:
It is not necessary to remove the radio control assembly or other components from the bracket.
- Instrument Panel Trim Pad - Left Side (2) - Remove - Instrument Panel Trim Pad Replacement (Left Side) Instrument Panel Trim Pad Replacement (Right Side)
- Instrument Panel Trim Pad - Right Side (2) - Remove - Instrument Panel Trim Pad Replacement (Left Side) Instrument Panel Trim Pad Replacement (Right Side)
- Instrument Cluster (2) - Remove - Instrument Cluster Replacement
- Head-Up Display (2) - Remove - Head-Up Display Replacement
- Instrument Carrier Bolt (1) - Remove [7x]
- Instrument Panel Bolt (2) - Remove
- Front Floor Console Rear Air Duct (3) - Remove - Front Floor Console Rear Air Duct Replacement
- Instrument Carrier Bolt (1) - Remove [6x]
- Instrument Panel Bolt (2) - Remove
- Note the location and routing of the instrument panel electrical harness assembly, to ensure proper reinstallation.
- Disconnect the fasteners securing the instrument panel electrical harness assembly to the instrument carrier (1) and position out of the way.
- Use a flat bladed plastic trim tool to help separate the instrument carrier (1) from the defroster nozzle.
- With the aid of an assistant lift the instrument carrier (1) rearward and upward from the tie bar assembly.
- Remove the instrument carrier (1) from the vehicle.