Hood Hinge Replacement

Fig 1: Hood Hinge

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedures Remove the hood. Refer to Hood Replacement . Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement . Remove the hood open assist spring. Refer to Hood Open Assist Spring Replacement .
1	Hood Hinge Bolt CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Hood Hinge to Hood Side
3	Hood Hinge Bolt to Body Side (Qty 2) Tighten 30 N.m (22 lb ft)
4	Hood Hinge to Body Side