Hood Replacement

Fig 1: View Of Hood & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Air Inlet Grille Panel Extension Replacement .
1	Hood Hinge Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 25 N.m (18 lb ft)
2	Hood Hinge Pivot Bolt [2x] Tighten 25 N.m (18 lb ft)
3	HoodHood Procedure Disconnect the electrical connector. With the aid of an assistant, remove the hood. Transfer components as necessary. Hood Adjustment (Chevrolet) Hood Adjustment (GMC) Hood Adjustment (Cadillac)