|
Preliminary Procedures
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
.
- Remove the headlamp. Refer to Headlamp Replacement
.
- Remove the rocker panel. Refer to Rocker Panel Molding Replacement
.
- Remove the front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement
.
- Remove the air inlet grille extension panel. Refer to Air Inlet Grille Panel Extension Replacement
.
- Remove the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement
.
- Remove the front compartment side sight shield. Refer to Front Compartment Side Sight Shield Replacement .
|
| 1 |
Front Fender Bolt
Tighten
9 N.m (80 lb in) |
| 2 |
Front Fender Bolt
Tighten
9 N.m (80 lb in) |
| 3 |
Front Fender Nut
Tighten
9 N.m (80 lb in) |
| 4 |
Front Fender Bolt (Qty: 5)
Tighten
9 N.m (80 lb in) |
| 5 |
Front Fender
Procedure
Transfer parts as needed. |