|
Preliminary Procedures
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (CTS)Front Bumper Fascia Replacement (CTS-V)
.
- Remove the headlamp. Refer to Headlamp Replacement
.
- If replacing the left side fender brace, remove the air intake splash shield. Refer to Intake Air Splash Shield Replacement
, for the 2.0L (LTG) engine or Intake Air Splash Shield Replacement
for the 3.6L engine.
- If replacing the left side fender brace, remove the left hand high note horn. Refer to Horn Replacement (Left Hand High Note)Horn Replacement (Right Hand Low Note)
- If replacing the right side fender brace, remove the right hand low note horn. Refer to Horn Replacement (Left Hand High Note)Horn Replacement (Right Hand Low Note)
|
| 1 |
Front Fender Front Lower Bracket Bolt (Qty: 5)
Tighten
9 N.m (80 lb in) |
| 2 |
Front Fender Front Lower Bracket Procedure
- Disconnect the electrical harness from the front fender front lower bracket.
- Transfer parts as needed.
|