Headlamp Replacement

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Headlamp

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement and Front Bumper Fascia Replacement (CTS-V) .
1	Headlamp Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Headlamp Procedure Grasp the headlamp and firmly pull straight back to release the top rearward retainer. Disconnect the electrical connector. Aim the headlamp after replacement. Refer to Headlamp Aiming .

Callout

Component Name

Preliminary Procedure
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement and Front Bumper Fascia Replacement (CTS-V) .

Headlamp Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Headlamp

Procedure

Grasp the headlamp and firmly pull straight back to release the top rearward retainer.
Disconnect the electrical connector.
Aim the headlamp after replacement. Refer to Headlamp Aiming .