Rear Seat Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench)

Preliminary Procedure

1. Remove the rear seat. Refer to Rear Seat Removal and Installation (Avalanche/Escalade EXT) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat) .
2. Remove the recliner handle. Refer to Rear Seat Recliner Handle Replacement (Tahoe/Yukon/Escalade with Bucket) .
3. Remove the outer finish cover. Refer to Rear Seat Cushion Outer Trim Panel Replacement (with ARS) .
4. Remove the inner finish cover. Refer to Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Cushion Inner Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) .
5. Remove the cushion lower trim cover. Refer to Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Cushion Trim Panel Replacement (Tahoe/Yukon/Escalade with Bucket) , Rear Seat Cushion Trim Panel Replacement (Avalanche/Escalade EXT) .

Procedure

1. Disconnect the seat cushion cover j-channel from the seat cushion frame.
2. Disconnect the electrical connector if equipped with heated seat.
3. Pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.