3rd Row Seat Head Restraint Guide Replacement

Fig 1: View Of Rear Seat Head Restraints & Guides

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the rear seat. Refer to Rear Seat Removal and Installation (Avalanche/Escalade EXT) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Split Bench) , Rear Seat Removal and Installation (Tahoe/Yukon/Escalade with Bucket Seat) .
1	Rear Seat Head Restraint Depress the button on the inboard head restraint guide to raise the head restraint to the full up position. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
2	Rear Seat Head Restraint Guides Release the j-channel at the bottom of the seat back and pull the seat back cover up enough to gain access to the head restraint guides. Squeeze the bottom of the head restraint guide together and push up to remove.