Seat Cushion Trim Cover and Pad Replacement (without HP2)

Fig 1: View Of Seat Cushion Trim Cover, Pad & Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (without HP2) , Front Seat Removal and Installation - Bucket (with HP2) . Remove the front seat recliner lever, if equipped. Refer to Front Seat Back Recliner Handle Replacement (without HP2) , Front Seat Back Recliner Handle Replacement (with HP2) . Remove the front seat lumbar actuator knob, if equipped. Refer to Driver or Passenger Seat Lumbar Support Actuator Knob Replacement (with HP2) , Driver or Passenger Seat Lumbar Support Actuator Knob Replacement (without HP2) . Remove the front seat adjuster outer finish cover. Refer to Front Seat Cushion Outer Trim Panel Replacement (with HP2) , Front Seat Cushion Outer Trim Panel Replacement (Manual Seat without HP2) , Front Seat Cushion Outer Trim Panel Replacement (Power Seat without HP2) .
1	Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement (without HP2) , Front Seat Cushion Inner Trim Panel Replacement (with HP2) .
2	Front Seat Riser Finish Cover TIP: Pull rearward to disengage the cover from the seat riser.
3	Front Seat Cushion Cover and Pad Procedure Disengage the j-channel retainers from the seat cushion frame. Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
4	Front Seat Cushion Pad Procedure If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .