Front Seat Removal and Installation - Bucket (without HP2)

Fig 1: Front Seat Assembly & Components (without HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster covers. Refer to Front Seat Adjuster Track Finish Cover Replacement . Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Front Seat Assembly Nut (Qty: 2) CAUTION: Refer to Fastener Caution . TIP: Adjust the seat rearward to access to the nuts. Tighten 55 N.m (41 lb ft)
2	Front Seat Assembly Bolt (Qty: 2) TIP: Adjust the seat forward to access the bolts. Tighten 90 N.m (66 lb ft)
3	Front Seat Assembly Disconnect the electrical connector. If removing and installing seat the center seat or floor console do not need to be removed.