LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Cushion Inner Trim Panel Replacement (without HP2)

Front Seat Cushion Inner Trim Panel Replacement (without HP2)

Fig 1: Front Seat Adjuster Inner Finish Cover
GM1678365Courtesy of GENERAL MOTORS COMPANY
Front Seat Cushion Inner Trim Panel Replacement (without HP2)

Callout Component Name
Preliminary Procedure 
Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (without HP2) , Front Seat Removal and Installation - Bucket (with HP2) .
1 Front Seat Adjuster Inner Finish Cover

Procedure

  1. Disengage the bezel around the seat belt buckle.
  2. Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover.
  3. Pull outward to release the retainers from the seat assembly.
scientia non olet · About LEMON Manuals