Front Seat Adjuster Replacement (with HP2)

Fig 1: Front Seat Adjuster Replacement (with HP2)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (without HP2) , Front Seat Removal and Installation - Bucket (with HP2) . Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cover and Pad Replacement (with HP2) , Driver or Passenger Seat Back Cover and Pad Replacement (without HP2) . Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) , Seat Cushion Trim Cover and Pad Replacement (with HP2) .
1	Front Seat Back Frame Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Front Seat Adjuster Assembly Procedure Disconnect the lumbar actuator assembly from the seat back frame and lumbar support. When replacing the seat adjuster assembly, transfer components as necessary.

Callout

Component Name

Preliminary Procedure

Front Seat Back Frame Bolt (Qty: 4)

CAUTION:

Tighten
50 N.m (37 lb ft)

Front Seat Adjuster Assembly

Procedure

Disconnect the lumbar actuator assembly from the seat back frame and lumbar support.
When replacing the seat adjuster assembly, transfer components as necessary.