Rear Floor Panel Carpet Replacement (with HP2)
| Callout | Component Name |
|---|---|
|
WARNING:
Always perform the High Voltage Disabling procedure prior to servicing any High Voltage component or connection. Personal Protection Equipment (PPE) and proper procedures must be followed.
The High Voltage Disabling procedure will perform the following tasks:
Failure to follow the procedures exactly as written may result in serious injury or death. Preliminary Procedures
|
|
| 1 | Cargo Tie Down Loop Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 35 N.m (25 lb ft) |
| 2 | Cargo Tie Down Loop Assembly |
| 3 | Rear Floor Panel Carpet Assembly Procedure: Enable the hybrid high voltage system. Refer to High Voltage Enabling . |