Seat Cushion Trim Cover and Pad Replacement

Fig 1: View Of Seat Cushion Trim Cover, Pad & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the front seat recliner lever, if equipped. Refer to Seat Back Recliner Handle Replacement - Front . Remove the front seat manual lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement . Remove the front seat adjuster outer finish cover. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat (Manual) or Seat Cushion Outer Trim Panel Replacement - Front Seat (Power) .
1	Front Seat Adjuster Inner Finish Cover Refer to Seat Cushion Inner Trim Panel Replacement - Front .
2	Front Seat Riser Finish Cover Tip: Pull rearward to disengage the cover from the seat riser.
3	Front Seat Cushion Cover and Pad Tip: Disengage the j-channel retainers from the seat cushion frame. Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
4	Front Seat Cushion Pad