Front Seat Replacement - Bucket

Fig 1: Front Seat Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster covers. Refer to Front Seat Adjuster Track Finish Cover Replacement . Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Front Seat Assembly Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 45 N.m (33 lb ft) Tip: Adjust the seat rearward to access to the nuts.
2	Front Seat Assembly Bolt (Qty: 2) Tighten: 45 N.m (33 lb ft) Tip: Adjust the seat forward to access the bolts.
3	Front Seat Assembly Tip: Disconnect the electrical connector. If removing and installing seat the center seat or floor console do not need to be removed.