Seat Cushion Outer Trim Panel Replacement - Front Seat (Power)

Fig 1: View Of Front Seat Adjuster Outer Finish Cover & Screw

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Adjuster Outer Finish Cover Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Seat Adjuster Outer Finish Cover Tip: Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover. Pull outward to release the retainers from the seat assembly. Disconnect the electrical connectors. If replacing the finish cover, remove the switches and install on new finish cover.