LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left front wheel house liner. Front Wheelhouse Liner Replacement (LGX) , or Front Wheelhouse Liner Replacement (LTG)
  2. Disconnect the input speed sensor electrical connector.
  3. GM4487717Courtesy of GENERAL MOTORS COMPANY

    Remove the input speed sensor bolt (1).

  4. Remove the input speed sensor (2).
  5. Remove the input speed sensor seal (3).
scientia non olet · About LEMON Manuals