Engine Mount Bracket Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Engine Mount Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement . Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . Support the engine with engine lifter. Remove the engine mount. Refer to Engine Mount Replacement .
1	Engine Mount Bracket Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Raise the engine until mount engine mount bracket bolts are accessible. Tighten 100 N.m (74 lb ft)
2	Engine Mount Bracket

Callout

Component Name

Preliminary Procedures

Engine Mount Bracket Bolt (Qty: 3)

CAUTION:

Procedure
Raise the engine until mount engine mount bracket bolts are accessible.
Tighten
100 N.m (74 lb ft)

Engine Mount Bracket